Slider by IWEBIX

Welcome to Cee-Jay Micro

Our goal is to provide our Customers with leading edge products and service, and our Principals and their Distributors, with the best engineering sales support in the industry.

What's new at Cee-Jay

June 12th, 2015

Cypress’s Synchronous SRAMs with ECC is the only high density Standard Sync/NoBLTM SRAMs in the market to be offered with the reliability of on chip error detection and correction

Cypress’s Synchronous SRAMs with ECC is the only high density Standard Sync/NoBLTM SRAMs in the market to be offered with the reliability of on chip error detection and correction.

Synchronous SRAM with ECC Highlights

Available in Standard Sync and NOBL™ architectures
Error-Correcting Code (ECC) to detect and correct single-bit errors
Ensures a FIT rate of <0.01 FIT/Mb that is 1,000x lower than a standard SRAM without ECC
Available in two voltage options: 2.5/3.3 V
165 BGA and 100 TQFP options available
Industry-standard, RoHS compliant packages
Industrial and commercial temperature grades
Minimize your memory power consumption
Active power ~20% lower than the next closest competition
Lowest standby current across all competition
Form, fit and function compatible with our 90-nm products

Learn more »

August 20th, 2014

Lattice Breaks the Rules With ECP5 FPGA Family for High-Volume Small-Cell, Microserver, Broadband Access & Video Applications

Lattice Semiconductor Corp. (NASDAQ: LSCC) today announced its ECP5™ family for small-cell, microserver, broadband access, industrial video and other high-volume applications where the lowest-possible cost, lowest-possible-power, and smallest-possible form-factor are crucial. The ECP5 Family ‘breaks the rules’ of conventional FPGA approaches to deliver a SERDES-based solution for designers to rapidly add features and functions to complement those delivered by ASICs and ASSPs, reducing development risk and quickly overcoming time-to-market challenges.

Lattice optimized the ECP5 family’s architecture with the goal of delivering the best value below 100k LUTs for performing critical functions as a companion chip to ASICs and ASSPs. Achieving 40% lower cost than competing solutions, optimizations include small LUT4 based logic slices with enhanced routing architecture, dual-channel SERDES to save silicon real estate, and enhanced DSP blocks for up to 4x resource improvements.

Learn more »

August 20th, 2014

Sharp Expands its Small TFT LCD Line-up for Personal Audio Visual (PAV) Applications

Sharp Microelectronics of the Americas (SMA) announced two additions to its small TFT LCD module line-up.The two CGS (Continuous Grain-Silicon) LCDs include a 1.6-inch Class (1.56-inch diagonal) Transflective Color LCD for wearable technology and a 2.95-inch (diagonal) SVGA+ LCD. The new displays, perfect for personal audio visual (PAV) applications,will be on show at Display Week 2014 in San Diego, CA, June 3 – 5.

The 1.6-inch Class LS016B8YUxx:The slim profile of this high-performance module is perfect for wearable product design. A highly reflective Transflective display (10% reflectionratio), it can be operated with the backlight off in most conditions to save power and is switchable between monochrome and color mode.Resolution of 180 ×RGB ×180 in color mode and an 800:1 contrast ratio delivers crisp images and superior outdoor readability.

The 2.95-inch LS030B3DXxx: This Landscape-mode module delivers an image with 366 ppi (pixels per inch) quality, due to a high aperture ratio, plus a highly-transmissive color filter and polarizer give it a high brightness of 600 nits (typical) and a contrast ratio of 1000:1 (typical). Excellent viewability is delivered via Sharp’s new wide view angle technology. The panel includes a COG (Chip-on-Glass) driver, with an internal controller and power supply.

Learn more »

August 20th, 2014

Micrel Launches Ultra-Low Jitter FUSION Crystal Oscillators That Offer Industry-Leading Performance in Advanced Communications Applications

Micrel Inc., (Nasdaq:MCRL),an industry leader in high-performance Linear and Power solutions, LAN and timing and communications solutions, today introduced the MX55/57 FUSION, crystal oscillator clock (XO) solutions. These devices offer industry-leading phase jitter performance of 170fsrms (12kHz to 20MHz) in standard 5mm x 7mm or 3.2mm x 5mm footprint. These XOs target a broad range of frequencies up to 840MHz and support standard frequencies for applications including 10/40/100G Ethernet, optical communications, SAS and PCI Express. All options are available in volume quantities and short lead times, with pricing below $10.00 for 1,000 quantities for most configurations. For samples, please contact your local distributor or use the Micrel ClockWorks Configurator web tool: http://clockworks.micrel.com/micrel.

The MX55/57 family offers a compelling high power supply noise immunity enabled by on-chip linear regulators that improve overall performance in noisy environments. The devices support 3.3V or 2.5V supply and LVPECL, LVDS, CMOS and HCSL output logic formats. These devices meet +50ppm total stability including aging and temperature drift across a -40°C to +85°C operating temperature range. The use of a proven plastic molded assembly improves long term reliability and minimizes aging drift compared to traditional XO devices. Finally, all options are available in a compact 3.2mm x 5mm package for the MX55 product family that reduces costly board space, a key concern for high channel density applications. The MX57 family of solutions comes in an easy-to-design 5mm x 7mm package option.
Learn more »

August 20th, 2014

IR’s IRFHE4250D FastIRFET™ 6×6 PQFN Power Block Featuring Exposed Top Delivers Superior Efficiency for DC-DC Applications

International Rectifier, IR® (NYSE: IRF), a world leader in power management technology, today announced the expansion of the power block family of devices with the introduction of the IRFHE4250D FastIRFET™ dual power MOSFET that reduces power losses by more than 5% at 25A compared to best-in-class conventional power block devices. The new 25V device is targeted at 12V input DC-DC synchronous buck applications including advanced telecom and netcom equipment, servers, graphic cards, desktop, Ultra book and notebook computers.

Learn more »